GUIDE
Important Safety Instructions
Thank you for choosing our product. Before installation, we would like to remind you some notes, which is very important for operating safely and properly, as follows:
￭Be sure to read this user manual, before starting your operation.
￭You must install the dish with correct direction and angle. If the dish is not working properly, contact your local dealer.
￭When the unit is suddenly moved to a hot area from a cold area, it may cause some problems. In that case, turn off the power, and turn on again after 1-2 hours.
￭Keep meter placed in clean space with sufficient ventilation.
￭Do not cover the meter with or place it on a unit that emits heat.
￭Clean the case by a soft cloth, with a little washing liquid.
￭Do not remove the cover.
￭Do not let the unit exposed to extreme heat, cold or humid conditions.
￭No liquids or any other materials to come inside of the unit.
Unpacking
Open the package and make sure it includes all below items, if any missing, please contact the reseller for replacement.
1. Digital Satellite Meter
2. User’s manual
3. AV cable
4. Car charger cable
5. Power Adaptor
6. Strap of carrying case
7. DC 12V connect line
NOTE:
Please refer to our actual configuration.
1.3 PRODUCT OVERVIEW&ILLUSTRATION
| NO | Description | FUNCTION |
| LNB IN | Connect to satellite antenna cable | |
| AV OUT | Connect to AV port for TV | |
| AV IN | Connect to AV port for meter | |
| HDMI | Use HDMI cable to connect for TV | |
| Power witch | Turn on/off meter | |
| USB Port | Connect to USB memory | |
| DC Slot | Connect to Adaptor Input | |
| Torch LED | Night lighting | |
| ANT IN | Connect to antenna of DVB-T/T2 signal | |
| Speaker | Speaker Integrated | |
| Power | Power indicator light | |
| 22KHZ | 22Khz indicator light | |
| 13V/18v | Vertical /Horizontal polarization voltage output light | |
| LOCK | Signal lock indicator light | |
| Charger (Note1) | Charger indicator light | |
| Red & TTXT | Red KEY &Teletext interface | |
| Green & SUBT | Green key & Subtitle interface | |
| Orange &TV/R | Orange key & TV and radio switch | |
| BLUE &AUDIO | Blue key & Audio interface | |
| AV-S | If we connect AV IN; switch AV in/out for LCD and speaker | |
| INFO | INFO key | |
| MUTE | MUTE | |
| MENU | Show the main menu on the screen or jump back to previous menu in sub-menu setting conditions | |
| EXIT | Escape from present menu and save the settings | |
| NEVIGATION KEY | Volume Control or move cursor, channel or change, confirm etc | |
| 0-9 | Number key to select channels or enter programming | |
| SCAN | “Quick Search” shortcut key | |
| F1 | Auxiliary function key | |
| F2 | Auxiliary function key | |
| F3 | Auxiliary function key | |
| F4 | Auxiliary function key | |
| LCD | TFT LCD Screen | |
| When power on the meter,displays the battery level | |
| DC 12V OUTPUT | DC 12V output for extern equipment(Please in kind prevail) |
Note1: When the adapter insert dc slot, charging indicator is often bright, when the batteries charged sufficient, the charge indicator is go out.
INSTALLATION OFMETER
OUTLINE
| ￭4.3 Inch High Definition TFT LCD Screen |
| ￭Fully DVB-S/S2/T/T2, MPEG-2/MPEG4 compliant |
| ￭MPEG-2 / H.264 Hardware decoding |
| ￭Digital meter for signal strength and quality |
| ￭Constellation analyzer |
| ￭Spectrum analyzer |
| ￭Supports scan of Auto, Blind, Manual or NIT |
| ￭Sound and Light Alarm for Locking Signal |
| ￭Auto Calculate Angle of AZ,EL |
| ￭Supports DISEQC 1.0/1.1/1.2,0/22khz Tone |
| ￭Speaker Integrated |
| ￭Support both AV out and AV in |
| ￭LNB short protect |
| ￭7.4V/3000mAh Li-Ion Battery Included ￭Software upgrade via USB port ￭Easy to carry |
THE MENU OSD INSTRUCTION
If you have installed and connected the cables of the meter, pressing MENU key to display the Main Menu.
￭DVB-S2
￭Spectrum
￭DVB-T2
￭Sat/TP Manage
￭Others
￭System Setting
Press the keys of ▲▼◄► to move the cursor up or down in the menu interface, then use OK key to confirm a selection.
DVB-S2
Select DVB-S2, then press ok key into the satellite Find.
Satellite
Press ◄►key into the satellite list. Use ▲▼ key to move the cursor, then press OK key to select the satellite of you want.
Local Frequency
Press ◄► key into the LNB list. Use ▲▼ key to move the cursor then press OK key to select the LNB of you want.
Transponder
Press ◄► key into the TP list. Use ▲▼ key to move the cursor then press OK key to select the TP of you want.
Frequency
Frequency of the current transport, Input the value by using the numeric keys.
Symbrate
Symbol rate of the current transport, Input the value by using the numeric keys.
Polarity
Press ◄► key to change Vertical or horizontal of polarization.
TONE
Press ◄► key to on or off22kHz TONE Switch.
Beep Tone
Press ◄► key to Switch beep tone. If we open the beep tone; when we into the search screen, the beep of lock alarm will open.
DiSEqC Mode
Press ◄► key to set the port type diseqc1.0/1.1 or Unicable
3.1.10 DisEqc type & Input
If we select diseqc1.0/1.1; we can press ◄► key to set the port number. If select Unicable, we can press ◄►to select IF Channel; and use number key to input center Frequency.
Quick Search
In the satellite Find interface, pressing OK key will into the quick search.
If you set the local Longitude and Latitude Under the system setting, the angle of LNB, the orientation and elevation of antenna, all will be display on the screen.
￭Constellation:Press blue key into the constellation.
￭ S/Q: Press the orange key to enlarge showing of the signal strength and quality.
￭ Scan: Press the red key to search the current TP.
￭ Auto:Press the green key to auto blind search the current satellite.
Spectrum
●Satellite-Spectrum
●Terrestrial-Spectrum
Satellite-Spectrum
Press ◄►key to change Frequency;
Press red key to change bandwidth;
Press green key to change Vertical or horizontal of polarization;
Press orange key to switch 22K on/off.
Press blue key to change mode Show IF or RF.
Terrestrial-Spectrum
When we enter into this interface, we can press ◄► key to scan some information about spectrum in different frequency point.
￭Full/Ch: Press red key to make all the frequency points we can see on the window or to make some frequency points on it.
￭Zoom: Press green key to enlarge showing the point you current select, and press again it will be back.
￭Locked: Press orange key to lock all the current frequency points, and remain unchanged unless you press again.
￭Scan: When the frequency points have been locked, you can press blue key to receive signal on a point.
DVB-T2
Select DVB-S2, then press ok key into the Scan Setup.
Country Setting
Press ◄►key to change the default country.
Channel No
Press ◄►key to change the channel number.
Frequency
Frequency of the current channel, Input the value by using the numeric keys.
Bandwidth
Press ◄►key to change the bandwidth, we can select 5, 6, 7 or 8M.
Mode
Press ◄► key to change the DVB standard, we have there types including T/T2/T+T2, you can select one you want.
Beep Tone
Press ◄► key to switch beep tone. If we open the beep tone, when we enter into the search screen, the beep of lock alarm will open.
Antenna Setting
Press ◄► key to change the antenna power, we have there types including 5v/12V/17v, you can select one you want.
Antenna Setting
Press ◄► key to power on or off the antenna
Quick Search
In the Channel Find interface, press OK key will enter into the quick search.
￭Ch Scan: Press OK/red key to search current channel.
￭Auto Scan: Press green key to auto search the current channel.
￭Beep:Press orange key to open beep tone.
￭ Zoom: Press blue key to enlarge showing of the signal strength and quality.
3.4 SAT/TP Manager
It has three options
∙Satellite Setting
∙Auto Scan
∙Transponder
Satellite Setting
In the all Satellites Setting:
Press blue key to clear all selecte of satellite.
Press orange key to selecte all satellites.
Press green key into auto scan interface.
Press red key into the Transponder interface.
Press ▲▼ key to move the cursor, then press ok key to change the satellite select or unselect.
Press ◄► to set the single satellite setting.
In the setting interface:
1, TP Manage: press red key into TP manager.
2, Auto Scan: press green key into auto scan.
3, LNB: Press ◄► key then change the LNB frequency.
4, Transponder: Press ◄► key then change the current TP.
5, DiSEqc1.0: Press ◄► key to change the DiSEqC port.
6, DiSEqc1.1: Press ◄► key to change the DiSEqC port.
7, Motor: Press ◄► key to change the DiSEqC port.
If we select DiSEqC1.2/USALS, press ok into the motor interface.
○ Transponder: Press ok key to change the current tp.
○ Mode: A, Position
A1 Direction: Press ◄► key to move direction to west or east.
A2 Position: set the satellite save position.
A3 Store: save the satellite position to set of A2.
○ Mode: B, Drive to Zero; move the cursor to GO, then press OK key, the motor will go to zero.
○ Mode: C, Drive to stored position; move the cursor to GO, then press OK key, the motor will go to position of we saving in mode A Position.
○ Mode: D, Drive to Satellite; move the cursor to GO, then press OK key, the motor will go to position of auto calculate.
D1 Direction: Press ◄► key to move direction to west or east.
○ Mode: E, Set East Limit or Set west Limit, limit the motor move to east or to west.
E1 Direction: Press ◄► key to move direction to west or east.
E2 Store: save the satellite position of A2
○ Mode: F, Set Limit enable or disable, set the limit enable or disable,
8, Unicable: Press ◄► key to select Unicalbe then press OK key into the Unicable setting.
Transponder: press ◄► key to change the current TP.
IF Channel: press ◄► key to change SCR channel.
Center Frequency: use value key to input number.
Store: store the setting.
Auto Scan
In the Sat/Tp Manager submenu, select Auto Scan into Automatic SAT Scan.
○ Satellite：Press ◄►key into the satellite list. Use ▲▼ key to move the cursor, then press OK key to select the satellite of you want.
○ Transponder: press ◄► key into the TP list. Use ▲▼ key to move the cursor, then press OK key to select the satellite of you want.
○ NIT: press ◄► key to switch network searcher on/off
○ Program: TV search type ALL/FTA
○ Scan Mode: scan mode select, we can select Default TP / One TP/Blind.
○ Scan Select: scan all satellites of selected or the current satellite.
Transponder
In the Sat/Tp Manager submenu, select Auto Scan into Transponder.
Press ▲▼ key to select the current satellite.
○ Press red key to edit satellite
NO.: Satellite number.
W-E: switch the satellite longitude west or east.
Longitude; use number key input value.
Satellite Name: press ok will open the keyboard; use the direction key input satellite name.
○ Press green key to delete satellite, then press ok key to confirm or press menu key to cancel.
○ Press orange key to add a satellite。
NO.: Satellite number.
W-E: switch the satellite longitude west or east.
Longitude; use number key input value.
Satellite Name: press ok will open the keyboard; use the direction key input satellite name.
○ Press blue key into auto scan interface.
Press ◄►key to TP manager.
Press ◄►key to TP manager.
○ Press red key to edit TP
NO.: TP number.
Frequency: use number key input value.
Symbol Rate: use number key input value.
Polarity: Press ◄► to change polarity
○ Press green key to delete TP, then press ok key to confirm or press menu key to cancel.
○ Press orange key to add a TP；Please refer to TP edit operations.
○ Press blue key into TP scan interface.
Others
In the menu interface, select Others, press ok key into it.
Program Info
In the Program Info we can check the info of the current TV.
Channel
Sort
Press red key into the sort list. Use ▲▼ key to move the cursor, then press OK key to select the sort type of we want; then press ok key to confirm or move the cursor to “x” press ok key to cancel.
Lock
Press ▲▼ key to the program that we want lock or unlock, then press green key to lock or unlock the program. When we deal with all the program need to be processed, press menu key to then press ok key to confirm the operation or select “x”; press ok key to cancel.
Del
Press orange key to select “Delete Select” or “Delete ALL”. Press ▲▼ key to select the program that we want to delete, then press orange key to label. When we deal with all the program need to be processed, press menu key to then press ok key to confirm the operation or select “x”; press ok key to cancel.
Sat
Press blue key then press ◄► key to select program list of the single satellite, or all satellite.
EPG
Press ▲▼ key to change program. If the current program has EPG info, it will appear on the right side of the window. Press ◄► key to change the day of the EPG info.
3.5.4 Movie,Music& Photo
Will need to play the files in the USB stick and insert it into the machine.
Press red key to option the mode of play files and text encode; then press menu key return.
Press green key to Change the folder File view to detailed list.
Press orange key to change mode to big Icon browsing.
Press the arrow keys to move the cursor, then press ok key to enter the file.
In the pay interface:
F1 Key: normal play.
F2 Key: pause.
F3 Key: fast backward; press F1 key return.
F4 Key: fast forward; press F1 key return.
○ Music& Photo
Please refer to the Movie operating.
System Setting
There contain all system set
○ Country Setting
Press ◄► key to change the country
○ OSD Language
Press ◄► key to change the OSD Language.
○ TV Format
Press ◄► key to change the TV Format.
○ Video Output
If we connect HDMI interface, we can press ◄► key.
○ TV Resolution
On the basis of the Video Output choice, we can press ◄► key to change the TV resolution.
○ Digital Audio Output
Press ◄► key to change the LPCM or RAW format.
○ Time Zone
Press ◄► key to change the Time Zone.
○ PWR Unit
Press ◄► key to change the PWR unit.
○ Flashlight
Press ◄► key to switch Flashlight on/off.
○ 12V
Press ◄► key to switch DC 12V output on/off.
Note: If the shell is no 12V interface, without this feature
○ KB-BackLight
Press ◄► key to switch delay time of back light.
○ Set Location
Press ◄► or ok key to set location longitude or latitude
Location: we can press ◄► to change the city, then auto select longitude and latitude.
Longitude: we can use number key input value then select west or east.
Latitude: we can use number key input value then select south or north.
○Upgrade
Will update the file into the U disk; then insert the machine; press ok key to update interface, use the direction key to select update file. Press ok key to update.
Warning: During the upgrade processing, do not power off or pull out the U disk; otherwise will damage the machine software, can’t boot.
○ Factory Setting
Press ◄► key, then press ok key to confirm factory.
NOTE: if you set factory, all the user settings and the database will be reset.
○ SYSTEM INFO
In the system setting, press info key will check the system version.
Technical Specification
| TRANSMISSION STANDARDS | ||
| DVB-S2/S, DVB-T/T2 | ||
| SATELLITE INPUT/DEMODULATION | ||
| Connector Type | F Type | |
| Input Frequency | 950 to 2150 MHz | |
| Signal Input Level | - 65 to -25 dBm | |
| Band Switch Control | 22KHz | |
| LNB Supply | 13V/18V, IMax 400mA | |
| Demodulation Type | QPSK,8PSK,16APSK | |
| Symbol Rate | 2<Rs<45Mband(SCPC/MCPC) | |
| DVB-T/T2 INPUT/DEMODULATION | ||
| Connector Type | FEMALE Type | |
| Input Frequency | 48 to 862 MHz | |
| Signal Input Level | -79.5dBm (MAX) | |
| ANT Supply | 5V, 12V/17V Imax 100mA | |
| Demodulation Type | QPSK,16QAM.64QAM,256QAM | |
| LCD FEATURES | ||
| LCD Type | TFT TRANSMISSIVE | |
| Number of Dots | 480(RGB) x272 | |
| Active area (WxH) | 95.04x53.86 mm2 | |
| AV output interface | ||
| Connector Type | 3.5 mm jack | |
| Video Output | CVBS, | |
| Audio output | Stereo Audio L/R output | |
| HDMI output connecter | ||
| Format | HDMI 1.3a | |
| AV input interface | ||
| Connector Type | 3.5 mm jack | |
| Video input | CVBS, | |
| Audio input | Stereo Audio L/R input | |
| AUDIO/VIDEO PROCESSING | ||
| Video decompression | MPEG-2 MP@HL, MPEG-1 Decoding,MPEG-4 ASP@L5 HD resolution,H.264 MP&HP@L4,HW JPEG decoding | |
| Resolving rate | PAL-25 frame@720*576,NTSC-30 frame@720*480, | |
| Signal compatibility | Support conversion for different video formats | |
| Video Format | 4:3,16:9,By Pan & Scan and Letter Box conversion | |
| Audio decompression | MPEG-1 Layer I/II ，MPEG-2 Layer I/II, | |
| Audio output mode | Stereo, Mono,R/L | |
| DATA SERVICE PORT | ||
| Connector | USB | |
| Data protocol | USB2.0 interface | |
| File management system | NTFS,FAT32,FAT16 | |
| file format | wma,mp3,mp4,avi,jpg,jpeg,bmp,img | |
| MICROPROCESSOR | ||
| Microprocessor | NOVATEK | |
| Clock Frequency | 500MHz | |
| SDRAM Memory | 1Gbit DDR3 | |
| Power SUPPLY | ||
| Li-Ion Battery | 7.4V/3000mAh(The machine behind labeling shall prevail) | |
| Adapter | OUTPUT:DC12V/1.5A, INTUPT:100-240VAC 50/60Hz(Will be subject to actual configuration) | |
| Power consumption | Max. 10W | |
| PHYSICAL CHARACERSTICS | ||
| Size (W x D x H) | 9.5x15.5x4.5(cm3) | |
| Net Weight | 1kg | |
Trouble Shooting
| Problem | Possible Causes | What To Do |
| No display light up | Power switch is not on Run out of batteries | Check to make sure power on. Even on adapter |
| No sound or picture, but the front panel power light is ON. | AV IN jack insert, but no video input | Pull out AV IN cable |
| No sound or picture | The satellite dish is not pointing at the satellite. | Adjust the dish. Check the Signal Level in the Antenna Setup Menu |
| Bad picture/Blocking Error | No signal or weak signal | Check the cable connections. LNB and other equipment connected between the LNB and the meter and adjust the dish. |
| The satellite dish in not pointing at the satellite | Adjust the dish. | |
| Signal is too strong | Connect a signal attenuator to the LNB input | |
| Satellite dish is too small | Change to a larger dish | |
| LNB noise factor too high. | Change to an LNB with lower noise factor | |
| The LNB is faulty. | Change the LNB | |
| AV out No picture(Video) | The system is connected by SCART cable and TV is not in AV mode. | Check the UHF channel fixed in your system and tune the UHF properly. |
| The key is not working. | Out of battery | Even on adapter |
| Key blocks | make sure no blocks between the front panel |
Note: If you still cannot resolve the problem with above reference. Please contact the local dealer or their after-sales service center.
