:
, 10 ( F7 GRID);
( F8 ORHO ). ;
( F9 SNAP). , .
:
- AUTOCAD?
- AUTOCAD?
- AUTOCAD?
- , ?
- ?
- 2
: AutoCAD
: - , AutoCAD.
:
(. 1.7). , AUTOCAD , .
. 34.1
. , . ; . , , .
Point ()
: : \\ ( ); \\ ( ). : Command: Point
:
(/ ).
. \ .
34.2 Line ()
: Draw \ Line ( \ ).
: Specify first point:
. Specify next point or [Undo]: [] ; Enter - ; - .
. Line () . .
34.3 11()
: Draw \ Circle ( \ ).
1. () .
) Center, Radius(l4em-p, ) - ;
|
|
1. .
2. Enter.
) Center, Diameter (, ) - .
1. .
2. d Enter.
3. Enter.
) 2 (2 ) - ;
:
First point on diameter
. Second point on diameter
.
) 3 - ; :
- First point on circle
-
- . Second point on circle
-
- . Third point on circle
-
- .
) , , Radius (.,.,)- ( , ) ;
) Tan, Tan, Tan (.,.,) - .
34.4 Arc ()
: Draw\ \ \
() .
a) 3Point (3 ) - , (. 1.8) : Start point .
34.2 -
Second point
.
End point
.
) St, C, End (, , ) - , .
- : Start point
- . Center
- . End point
- (. 1.9)
34.3 -
) St, , Ang (, , ) - .
) St, , Len (, , ) -
;
) St, , Ang (, , ) - , ;
) St, , Dir (, , ) - ,
( );
) , St, Ang (, , ) - , ;
) , St, Len (, , ) - ,
.
. .
34.5 Pline ()
- .
: Draw\ Pline ( \ ).
:
Specify start point
. Current line-width 0.0000
0.0000
Specify next point or [Arc/Halfwidth/Length/Undo/Width]:
[\\\\]
W Enter.
Specify starting width <0.0000>:
1 Enter.
Specify ending width <1.0000>:
Specify next point or [Arc/Halfwidth/Length/Undo/Width]
.
lin ()
- . : Draw \ Mline \ \ . : Specify start point or [Justification/Scale/STyle]: [ \ \ ]
|
|
, J - , S - () , ST - .
point
.
. \ .
34.7 Rectang ()
: Draw\ Rectang ( \ ).
: Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]:
.
Other corner
.
.
1. Draw ()\Rectang
.
3. :
Command: _rectang
Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]:/
.
Specify other corner point or [Dimensions]:
d Enter. Specify length for rectangles <0.0000>:
, , 60 Enter. Specify width for rectangles <0.0000>:
, , 50 Enter.
. - ; F -
; W - .
34.8 Polygon ()
: Draw \ Polygon ( \ ).
:
Enter number of sides <default>
< >
, , 4.
Specify center of polygon or [Edge]
<>
.
Enter an option [Inscribed in circle/Circumscribed about circle] <l>
[ / ]
: I - ; - .
Specify radius of circle
, () .
1. \ . :
polygon Enter number of sides <4>:
, , 4 Enter. Specify center of polygon or [Edge]:
Enter.
Specify first endpoint of edge:
.
Specify second endpoint of edge:
.
34.9 Ellipse ()
: Draw \ Ellipse ( \ ).
) Draw \ Ellipse\C (\\) -
;
) Draw \ Ellipse\ Axis\End (\\, ) -
.
) Draw \ Ellipse\Arc (\\) - .
34.10 Spline()
: Draw\Spline
(\ ).
, . Enter.
Donut ()
: Draw\Donut (\ ).
: Specify inside diameter of donut <0.5000>:
|
|
< >
Enter.
Specify outside diameter of donut <1.0000:
< >
Enter.
Specify center of donut or <exit>:
<>
.
Specify center of donut or <exit>:
Enter.
2D , . , .
. , . , ( Tab) Enter, Enter.
.
.
. . , , . ( ), ( ) , , . : , , , .. . , ( Tab).
. , , .
. , . , , . : AutoCAD , .
.
, . . . . . , .
MS Power Point, , .
, . : .
, . , .
. , . , , .
- ?
- ?
- ?
- ?