IV Translate the paragraphs in italics in a written form.
V Questions for discussion:
1. What is the difference between hand and machine stitches?
2. Why do modern sewers prefer machine stitching?
3. When are hand stitches mainly used?
4. Why is it better to use contrasting thread while basting?
5. What does the length of a basting stitch depend on?
6. What kinds of basting do you know?
7. What are all basting stitches used for?
8. What stitch is invisible but strong?
9. What are different hemming stitches used for?
10. Do you use all these mentioned stitches while sewing? Have you ever formed all of them?
TEXT C
I Mind the following words and word-combinations:
1. patchwork
2. appliqué
3. a bedspread
4. Seminole Indians ( )
5. an outline ,
6. an outfit ,
7. batting
II Listen to the text and be ready to answer the questions:
1. What are the stitched arts used for?
2. Why did people begin to do patchwork?
III Listen to the text again. Decide if the statements are true or false.
1. The stitched arts can be performed only with a machine.
2. Pure decoration is much complicated sewing.
3. Patchwork isnt used for making clothes.
4. Seminole Indians began to use quilting many hundred years ago.
5. Batting is often used in quilting.
UNIT 7
TEXT A
I Listen and remember the following words:
1. a casing
2. heading
3. a ruffle
4. a cuff
5. to button
6. a dart
7. a curve ,
8. trimming
9. braided
10. a shank
II Read and remember the following phrases:
1. a self casing
2. an applied casing
3. bias tape (fabric)
4. a lapel collar
5. a ruffled bertha collar
6. a top-stitched dart ,
7. a snug fit ,
8. metal protrusion
Construction basics
Knowing and mastering the basis of constructing is very important and desirable for future specialists in sewing as well as for professionals.
Casings are fabric tubes that hold elastic and drawstrings in place. Casings are usually found at waistlines, sleeves, hemlines, and necklines. A self casing is a fabric extension on the garment edge. It is folded back and stitched down.
Applied casings are made by sewing a separate piece of fabric to the garment. Applied casings are recommended when the garment fabric is bulky. The applied casing fabric should be of lighter weight fabric or bias tape. It may be sewn to the garment edge or within the garment. A good example would be a waistline casing. A strip of straight or bias fabric or tape is stitched to the garment along the casing line. Casings may be sewn with headings. A heading is an extension of fabric between the casing and the edge of the garment. Narrow headings (3 mm) give the casing a tailored finish. Wider headings form ruffles when the casing is drawn in.
|
|
|
Collars add design interest in the neckline area of clothes. Collar styles range from tailored lapel collars to ruffled bertha collars. There are three kinds of collars: standing collar, flat collar, and rolled collar. The following are the three basic steps to collar construction: attaching the interfacing, forming the collar, attaching the collar to the garment.
Cuffs put a finishing touch to the edges of sleeves and pants. Cuffs may be simple bands, or they can be buttoned or turned back. If a cuff on a sleeve does not button it must slide easily over the hand but not appear too loose.
A cuff has three parts: cuff, interfacing, and facing. Sewing a cuff is a three-step process: interfacing applying, cuff forming, cuff attaching.
Darts shape a flat piece of fabric to fit the curves of your body. The two basic types of darts are single pointed and double pointed. Parallel, radiating, or topstitched darts can add unique design touches. Darts are used at necklines, bustlines, elbows, waistlines so forth. Vertical darts fit fabric into the waist and shoulder. Horizontal darts fit fabric into the bust and elbow.
Darts are the second sewing step after stay stitching. Pinning, stitching, trimming and pressing are the steps in making darts.
Elastic creates a snug fit and at the same time allows easy movement. It may be sewn directly to the fabric or inserted in a casing. Braided and woven elastic are in several widths. Braided elastic narrows when stretched, it can be used in casings. Woven elastics have less grip. They are good for stitching on edges because they do not narrow when stretched.
Buttons can simply fasten the edges of clothes. They can also add design interest. They can be a very important part of the total look. The size of a button is measurement of its diameter. This is stated in fractions of an inch.
There are two basic types of buttons: shank and sew-through.
A shank button has a plastic or metal protrusion on the back called a shank. The shank allows space for the upper layer of fabric to rest when the closing is buttoned. Sew-through buttons have holes on the face of the button. It is a good idea to make a thread shank when attaching a sew-through button.
Button holes are slits in fabric that hold buttons that are attached to another piece of fabric. The edges of a buttonhole can be bound with fabric for a tailored look, or they can be worked with thread by machine or hand. Buttonhole should be evenly spaced and exact in length. They should be set on grain along the center-front or center-back placement line. Horizontal buttonholes extend ⅛ inch (3 mm) over the button placement line toward the folded garment edge.
Vertical buttonholes should be set ⅛ inch (3 mm) above the button placement point. The distance between the button placement line and the finished edge line should equal the button diameter. The finished edges of machine-worked buttonholes may be square, oval, or keyhole.
III Answer the questions:
1. What are casings?
2. What kinds of casing can be used in sewing?
|
|
|
3. How can they be sewn?
4. What kinds and styles of collars were mentioned in the text?
5. How can be cuffs attached?
6. What are the functions of darts?
7. What do we use buttons for?
8. What kinds of buttons do you know?
9. How should one make buttonholes?
IV Complete the sentences with the words from the text:
1. Casings and elastic are found at
2. Casings may be
3. There are three : standing, flat and rolled.
4. Cuffs may be or slide over the hand.
5. Darts are the second
6. Buttons are used to
V Find the English equivalents to the words:
˳ , 볿, , , , , , , , .
VI Make up sentences with the terms:
Applied casing, waistline, a tailored finish, to attach, to sew a cuff, horizontal and vertical darts, buttonholes.
VII Give definitions to the words:
A casing, a collar, a cuff, a dart, a button hole, heading.
VIII Translate the sentences into English:
1. 2 : .
2. , .
3. , , .
4. .
5. , , .
6. .
7. : , 볺, , .
8. 볿, .
9. : , .
10. , .
IX Speak on the topic using the following words and word-combinations:
Self and applied casings, kinds of collars, to put a finishing touch, a cuff, a dart, to fit curves, to fasten, types of buttons, buttonholes.
TEXT B
I Read and remember:
1. crisp ,
2. to be squeezed ,
3. heat-fused
4. a thread tack
5. twill -
6. an armhole
7. a lining fabric
8. an open network fabric
9. slippery
II Read the text and define the main idea of it:
Tailoring Basics
An interfacing is a piece of fabric between the garment and facing. Usually edges and design details such as collars, cuffs, pockets, waist bands, front closing and hems are interfaced. Interfacing helps these areas hold their shape, look crisp and wear longer.
Selecting the right interfacing fabric and interfacing weights should be considered. The three layers should be bent and squeezed. The interfacing should support, lend no overpower the fabric. Edge crispness suited to fabric and design must be selected.
Heat-fused interfacing often becomes slightly firmer after fusing. When deciding between two weights it is usually best to select the lighter of the two weights. Interfacing must be washable if the garment is washable. Interfacing may be hand stitched, machine stitched or fused to the garment.
Reinforcements are used to hold and support areas and points of strain. Methods of reinforcing garments include the use of stabilizing tapes, a second row of stitching 1/8 inch (3mm) from the first, finely stitched seams, thread tacks, buttons and fabric backings. The method of stitching a piece of twill tape into or next to the seam is used on shoulder seams in knits, pocket openings, jacket front seams, collar roll lines, lower armhole seams, waist lines and kimono sleeve seams.
Underlinings have many advantages. They help give a garment an expensive look. They build shape and depth into the fabric and design lines. Underlinings support stitching lines, prevent pressmarking and stitch marking and hold loosely woven or stretchy fabric in shape. Hand stitches are attached to underlinings. A firmly woven lightweight fabric should be selected. Some lining fabric can be used for underlinings. It is advisable to underline the main garment pieces: front and back of skirts, pants, jackets, vests, dresses and sleeves. Light coloured and open network fabrics should be checked for colour change. If the colour does change all pieces except facing must be underlined. The fabric and underlining layers are sewn together to firm one piece.
|
|
|
Linings give a finished look to blazers, vests, skirts and pants. A lining is like a second item of clothing on the inside of your garment. A firmly woven slippery lining fabric will hold the garment in shape and allow easy movement to the body.
When using a lining seam finishes are not necessary. Lining hems are sewn to the garment hem or hemmed separately.
