Continue New Dimension Style, : Lines and Arrows, Text, Fit, Primary Units, Alternate Units, Tolerance. , , .
1. Lines and Arrows (.3) , , ; ; . : Dimension Lines, Extension Lines, Arrowheads Center Marks for Circles.
. 3.
Dimension Lines . , -.
Color .
Lineweight .
Extend Beyond Ticks , ( , ). .
Baseline Spacing . .
Suppress Dim Line 1 . , , . , - , , .
Suppress Dim Line 2 .
Extension Lines . , -.
Color .
Lineweight .
Extend Beyond Dim Lines , . .
Offset From Origin . .
Suppress Ext Line 1 .
Suppress Ext Line 2 .
Arrowheads . .
1st . , .. , . , .
|
|
2nd .
Leader .
Arrow Size . .
Center Marks for Circles . .
:
None, ;
Mark, ;
Line, .
Arrow Size . Mark, . Line, . .
2. Text (.4) . .
. 4.
Text Appearance . , -.
Text Style . . - , , Text Style.
Text Color . ByBlock.
Text Height , Text Style Height . , Text Appearance , . .
Fraction Height Scale , . .
Draw Frame Around Text .
Text Placement , . .
Vertical Position :
Centered ;
Above ;
Outside ;
JIS .
Horizontal Position :
Centered ;
|
|
At Ext Line 1 ;
At Ext Line 2 ;
Over Ext Line 1 ;
Over Ext Line 2 .
Offset From Dim Line . .
Text Alignment , , 0 ( ) 90 ( ). .
Horizontal .
Aligned With Dimension Line .
ISO Standard ISO.
3. Fit (.5) . .
Fit Options , . -.
Either the Text or the Arrows, Whichever Fits Best , . , , .
Arrows , .
Text , .
Both Text and Arrows , . . .
Always Keep Text Between Ext Lines .
Suppress Arrows If They Don't Fit Inside Extension Lines , .
. 5.
Text Placement , - . .
Beside the Dimension Line .
Over the Dimension Line, with a Leader . .
Over the Dimension Line, Without a Leader . , , .
Scale for Dimension Features . .
Use Overall Scale Of .
Scale Dimension to Layout (Paper Space) .
. Use Overall Scale Of. , .
Fine Tuning Options , . .
|
|
Place Text Manually When Dimensioning .
Always Draw Dim Line Between Ext Lines .
4. Primary Units (.6) , , . .
. 6.
Linear Dimensions . .
Unit Format . Decimal.
Precision . 0,00.
Fraction Format .
Decimal Separator . Comma.
Round Of . , .
Prefix . .
Suffix . .
Measurement Scale . , 1, . -.
Scale Factor . .
Apply to Layout Dimensions Only .
Zero Suppression . .
Leading .
Trailing .
0 Feet Feet.
0 Inches Inches.
Angular Dimensions . .
Units Format . Decimal Degrees.
Precision . 0.
Zero Suppression . .
Leading .
Trailing .
5. Alternate Units , . : Alternate Units, Zero Suppression Placement.
|
|
Alternate Units :
(Unit Format) (Precision) ;
(Multiplier for Alternate Units), ;
(Round Distances To);
(Prefix);
(Suffix).
Zero Suppression .
Placement : .
6. Tolerance (.7) . : Tolerance Format Zero Suppression Alternate Unit Tolerance Zero Suppression .
. 7.
Tolerance Format , , . .
Method :
None ;
Symmetrical / ( );
Deviation ;
Limits ;
Basic ( ).
Precision ( ) . 0,00.
Vertical Position :
;
Middle ;
Bottom .
Upper Value .
Lower Value .
Scaling for Height .
Zero Suppression , . .
Alternate Unit Tolerance .